10.4.1.1
Selecting a buttonhole in the main level
30
Sequence mode
In the main level it is possible to change any time between the
memorized buttonholes of the sequence.
1
Keys ïð
With the ïð keys it is possible to select any buttonhole
of the displayed sequence.
The selected buttonhole will be highlighted with a bar.
To help you, the present buttonhole contour will be
displayed in the field 1 and in the field 2 the
corresponding values.
3
Monoflex mode (simple cut)
Two knife positions are possible with the subclasses
580-312000, 580-321000 and 580-341000 that is why
the field 3 shows a bar in addition.
The bar position shows which knife position is allocated
to the buttonhole.
2