Push Buttons; Setting The Fabric Stops - DURKOPP ADLER 580 Operating Instructions Manual

7.

Push buttons

8.

Setting the fabric stops

24
By means of the push buttons it is possible to control the clamps and to
start the sewing operation. According to the setting in the service menu
(see service instructions) the function is different.
1. Setting
–
Key 1: The clamps are opened or closed respectively.
–
Key 2: The sewing operation starts when the clamps are closed.
2. Setting
–
Key 1: The clamps are opened or closed respectively.
–
Key 2: If the clamps are not lowered, they will be lowered now. The
sewing operation starts.
Caution: Danger of injury !
Adjust the fabric stops only when the buttonhole automat
is switched off!
1
–
Place the sewing material until it touches the fabric stops 2 on both
sides (right and left).
–
Loosen the screws 1 on the right and left.
–
Adjust the sewing position by moving the fabric stops 2.
–
Tighten the screws 1 again.
2
1