Changing Settings Without The Connection Assistant - Gigaset S540 IP User Manual

Making VoIP settings
Changing settings without the
connection assistant
You can change your provider's VoIP set-
tings and the VoIP user data via the menu
without starting the connection assistant.
Downloading your VoIP provider's
settings
The general settings for various VoIP pro-
viders are available for download on the
Internet. The relevant website is precon-
figured in your phone.
Precondition: your phone is connected to
the Internet.
¢ ¢
v Ð
Settings
~
Enter the system PIN and press
.
§OK§
Select Provider
Select and press
The phone establishes a connection to the
Internet.
q
Select country and press
q
Select VoIP provider and press
.
§OK§
Your VoIP provider data is downloaded
and saved in your phone.
Notes:
– If an error occurs during the download, an
error message will be displayed. You can
find possible messages and measures in the
table on page 94.
– You can make and adapt the general set-
tings for your VoIP provider manually via
your phone's Web configurator, see
page 80.
Automatic update for the VoIP provider
settings
After the first download of the VoIP pro-
vider settings, your phone will check daily
whether a newer version of the file for
your VoIP provider is available via Internet
on the Siemens configuration server. If
this is the case, when the handset is in idle
status the message
70
¢
Telephony VoIP
.
§OK§
§OK§
New profile available
will be displayed, and the message key
f flashes.
f
§Yes§
~
The new data for your VoIP provider will be
downloaded and saved on the phone.
Notes:
– If you reply to the request with §No§, the dis-
play will not be repeated. The message
New profile available
again if a newer version of the VoIP settings
than the one rejected is available.
– You can specify the automatic version
check via the Web configurator (page 93).
Entering/changing VoIP user data
The VoIP settings must also be extended
for your personal data. You will receive all
necessary data from your VoIP provider.
Note:
.
Please note when making these entries that
the VoIP user data is case sensitive. To enter
text see page 104.
¢
v Ð
Settings
¢
VoIP
¢
Provider Registr.
¤
Change multiple line input:
Username:
Enter the user name (caller ID) for your
VoIP provider account. The
usually identical to your Internet phone
number (the first part of your SIP
address see page 81).
Authent. Name: / Authent. Password:
Enter the provider-dependent access
data that has to be transferred by the
phone to the SIP service at registration.
¤
Click
§Save§
Press the message key.
Press the display key to con-
firm the prompt.
Enter the system PIN and press
.
§OK§
will only be shown
¢
Telephony
(enter system PIN)
Username
to save the settings.
is