Gigaset S540 IP User Manual page 60

Transferring a call to another handset
You can forward (connect) an external
call, made via fixed network or VoIP, to
another handset.
u
Open list of handsets.
The external caller hears
music on hold if activated
(page 67).
s
Select a handset or
press
§OK§
When the internal participant answers:
¤
If necessary announce the external call.
a
Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer
or the line is busy, press the display key
, to return to the external call.
§End§
When transferring a call you can also press
the end call key a before the internal
participant lifts the receiver.
Then, if the internal participant does not
answer or the line is busy, the call will
automatically return to you (the display
will show Recall).
Initiating internal consultation call,
conference call
You are talking to an external participant
(via fixed network or VoIP) and can call an
internal participant at the same time to
hold a consultation call.
u
Open list of handsets.
The external caller hears
music on hold if activated
(page 67).
s
Select handset and press
When an internal participant answers you
can speak to them.
You have the following options:
and
Call All
.
§OK§
Ending a consultation call
Press the display key.
§End§
You are reconnected with the external
subscriber.
Initiating a conference call
Press the display key.
§Conf.§
You are in a three-way conference call
with the external and the internal sub-
scriber.
If the internal subscriber who has been
called ends the call (press end call key
a), you will be connected with the
external subscriber. If you press end call
key a, the external call will be trans-
ferred to the internal subscriber.
Accepting/rejecting call waiting during
an internal call
If you get an external call while conduct-
ing an internal call, you will hear the call
waiting tone (short tone). With Calling
Line Identification, the caller's number will
appear in the display.
Ending an internal call, accepting an
external call
Press the display key.
§Accept§
The internal call is ended. You are con-
nected to the external caller.
Rejecting the external call
Precondition: the external call is waiting
on the fixed network connection.
Press the display key.
§Reject§
The call waiting tone is turned off. You
remain connected with the internal sub-
scriber. The ringer tone can still be heard
.
on other registered handsets.
Note:
You can not reject calls on the VoIP connection.
Using several handsets
59