Approval; Specifications - Gigaset S540 IP User Manual

Gigaset
Table of Contents

Advertisement

Approval

This device is intended for analogue
phone lines in your network.
Voice over IP telephony is possible with an
additional modem via the LAN interface.
Country-specific requirements have been
taken into consideration. We, Siemens
Home and Office Communication Devices
GmbH & Co. KG, declare that this device
meets the essential requirements and
other relevant regulations laid down in
Directive 1999/5/EC.
A copy of all international 1999/5/EC Dec-
larations of Conformity is available at:
http://www.siemens.com/gigasetdocs

Specifications

Recommended batteries
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u
Sanyo Twicell 650
u
Sanyo Twicell 700
u
Panasonic 700 mAh "for DECT"
u
GP 700mAh
u
Yuasa Technology AAA Phone 700
u
VARTA Phone Power AAA 700mAh
u
GP 850mAh
u
Sanyo NiMH 800
u
Yuasa Technology AAA 800
The handset is supplied with two recom-
mended batteries.
Handset operating times/charging
times
The following information relates to bat-
teries with a capacity of 650 mAh.
Standby time
around 170 hours (7 days)
Talktime
around 13 hours
Charging time
around 6 hours
The operating and charging times apply
only when using the recommended bat-
teries.
Note:
When the display backlight is switched on, the
standby time of the handset is reduced to
around 30 hours.
Base station power consumption
Depending on current status, around
2.5 W.
Appendix
101

Advertisement

Table of Contents
loading

Table of Contents