Gigaset S540 IP User Manual page 87

Web configurator
Saving settings on phone
¤
Click on Set to save the changes.
The Connections list will be shown after
saving (see Figure 2 on page 79).
If you want to reject the changes that have
been made, click on Cancel. The Web page
is re-loaded with the data saved on the
phone.
Please note: If you do not make any
entries for a lengthy period, the connec-
tion to the Web configurator is automati-
cally terminated. Unsaved entries are lost.
If necessary, implement temporary secu-
rity measures. You can subsequently con-
tinue the entry and make changes if nec-
essary.
Activating new connection
If you have configured a new VoIP connec-
tion, you must also activate it.
In the list:
Connections
¤
Activate the relevant option in the
Active column (½ = activated).
Your phone will register itself using the
relevant access data with the VoIP pro-
vider. If the registration is successful, after
a short period the Status
for the connection. You can now
registered
be reached on this VoIP phone number.
Note:
Once the new entry has been made, the VoIP
phone number for each handset is assigned as
a receiving number. For how to adjust the
assignment, see page 87.
86
column will show
Selecting the VoIP provider and
downloading the VoIP provider data
Profile files with the general access data
for the most important VoIP providers are
available for download on the Siemens
server on the Internet. The address for the
server is stored in your phone (page 92).
Navigation:
¤
Open the following Web page:
¢
Settings Telephony
¤
Click on the button behind the first
Edit
VoIP connection.
¤
In the IP connection
Select VoIP Provider
This will display information on the down-
load procedure.
The phone establishes a connection with
the Siemens server on the Internet. The
download procedure has several steps:
¤
Click on Next.
¤
From the list, select the country for
which the list of VoIP providers is to be
loaded.
¤
Click on Next.
¤
Select a VoIP provider from the list. If
your provider is not included in the list,
select Other Provider. You will then have
to enter all the VoIP data manually
(page 80).
¤
Click on Finish.
The data for the provider selected will be
loaded onto your phone.
¢
Connections.
area, click on the
button.