Changing The Default Connection - Gigaset DX800 A User Manual

Hide thumbs Also See for DX800 A:
Table of Contents

Advertisement

Configuring the system settings
Changing the default
connection
You can connect your base to the Internet
(DSL connection) to make calls via VoIP and,
in addition, to a default telephone connec-
tion – the ISDN or analogue fixed line. Your
telephone automatically detects the net-
work to which it is connected and changes
its configuration accordingly.
Please note
Connect the phone to the telephone
connection first and only afterwards to
the power supply.
If you change the phone connection from
ISDN to the fixed line or vice versa, the fol-
lowing message is displayed:
Network Detection
Ð
Your telephony
connection has
changed
¤
Press the display key
identification.
Once the network has been identified, the
following appears in the display:
Adapt system configuration to public
network?
Or:
Adapt system configuration to ISDN
network?
¤
If the network has been identified cor-
rectly, press the display key
If you wish to repeat the network identifica-
tion procedure, press the display key
instead.
140
OK
§OK§
to start network
§Yes§
.
§No§
Once you have confirmed the offered tele-
phone connection with
tings on the phone relating to the connec-
tion must be reset first so that the phone's
configuration can be adjusted to the
changed connection.
The following is displayed:
Network Detection
Ð
All system settings
will be reset
to defaults
No
¤
Press the display key
reset.
All necessary system settings are reset.
IP and VoIP settings, for example, are
retained and the handsets are still regis-
tered.
If there were no VoIP connections config-
ured on the base before the change of con-
nection, after the reset the installation wiz-
ard is started for the current connection (see
the following table).
Connection
Wizards in the
following order
ISDN and VoIP ISDN wizard
IP wizard
Registration wizard
Connection wizard
Fixed line and
IP wizard
VoIP
Registration wizard
Connection wizard
For the connection wizard procedure see
page
20ff.
§Yes§
, any system set-
Yes
§Yes§
to start the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx800a

Table of Contents