Functions During A Call; Functions After A Call - Gigaset S540 IP User Manual

Functions during a call

Initiate ringback
You hear the busy tone.
¢
Ringback
§Options§
a
Press the end call key.
Consultation
During a call:
Press the display key.
§Ext.Call§
~
Enter a number or copy it from
the directory and press
The number will be dialled via the fixed
network connection.
Note:
After a few seconds, the number selected for a
consultation call is saved in the last number
redial list.
You have the following options:
u
Toggling:
¤
Use q to toggle between the par-
ticipants.
– End call with active participant:
End Active
§Options§
u
Conference call:
– Call both subscribers: press the dis-
play key .
§Conf.§
– End the conference call (toggling):
press display key
– End call with both participants: Press
the end call key a.
.
§OK§
Call.
.
§EndConf§
Network services – fixed network
Accepting a waiting call
Precondition: Call waiting is activated
(page 26).
Press the display key.
§Accept§
Or: if the caller's number is not trans-
ferred:
¢
Accept waiting call
§Options§
You have the option of toggling or holding
a conference call.
Notes:
– Without CLIP a waiting call is only
announced with a beep.
– If the first call was an internal call, the inter-
nal connection is ended.
– An internal call waiting is shown on the dis-
play. You can neither accept the internal
call nor reject it.
Rejecting a waiting call
¢
Reject waiting call
§Options§

Functions after a call

Cancelling ringback
¢
v ê
Sel. Services
If you have cancelled the ringback, a code
is sent.
¤
After confirmation from the telephone
network, press the end call key a.
¢
Ringback Off
27