Table of Contents
Advertisement
First steps
Completing the VoIP settings
If you have made all the required entries,
the message
"Connection data
appear on the display. The handset returns
to idle status.
If all the settings are correct and if the
phone can establish a connection to the
VoIP server, then the internal name of the
handset will be displayed (example):
Ð
V
INT 1
10.08.06
09:45
FixedLine
You can now use your phone to make calls
via the fixed network and the Internet.
Callers can reach you on your fixed
network number and your VoIP number.
Note:
To ensure that you can always be reached via
the Internet, the router must be permanently
connected to the Internet.
No connection to the Internet/VoIP server
If one of the following messages is dis-
played instead of the internal name after
the connection assistant is closed, errors
have occurred:
u
Server not accessible!
u
Provider registration failed!
Below you will find possible causes and
measures you can take.
Server not accessible!
The phone has no connection to the Inter-
net.
¤
Check the cable connection between
the base station and the router (the
LED on the base station must light up)
and the connection between the router
and the Internet connection.
¤
Check whether the phone is connected
to the LAN.
14
complete" will
IP
– It may not have been possible to
dynamically assign an IP address to
the phone
or
– You have assigned a static IP address
to the phone that has either already
been assigned to another LAN sub-
scriber or does not belong to the
router's address block.
¤
Find the IP address using the hand-
set menu:
¢
v
Ð
Settings
¢
Local Network
¤
Start the Web configurator with the
IP address.
¤
If no connection can be established,
change the settings on the router
(activate DHCP server) or the
phone's IP address.
Provider registration failed!
u
Your personal data for registering with
the VoIP provider may have been
entered incompletely or incorrectly.
¤
Check your entries for Username,
Authent. Name
and
In particular, check your use of
upper and lower case.
To do this, open the following menu
on your handset:
¢
v
Ð
Settings
¢
¢
VoIP
Provider Registr.
(see page 70)
u
The server address for the VoIP server
has not yet been entered, or has been
entered incorrectly.
¤
Start the Web configurator.
¤
¢
Open
Settings
¢
Connections
¤
Edit the server address where neces-
sary
¢
Base
(see page 71)
Authent.
Password.
¢
Telephony
Telephony
Web page.
Advertisement
Table of Contents
