Setting The Alarm Clock; Settings; Restoring The Handset Default - Gigaset S540 IP User Manual

Setting the handset

Setting the alarm clock

Precondition: The date and time have
already been set (page 9).
Activating/deactivating the alarm
clock and setting the wake-up time
¢
v ì
Alarm Clock
¤
Change multiple line input:
Activation:
Select or Off.
On
Time:
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1-6).
¤
Save changes (page 104).
You will see the ¼ icon.
A wake-up call with the selected ringer
melody is signalled on the handset.
The wake up call sounds for 60 seconds.
The display shows Alarm
pressed, the wake-up call is repeated
twice at five minute intervals and then
switched off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
or
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
66
Clock. If no key is

Restoring the handset default

settings

You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, call-by-call
list, calls list, SMS lists or the handset's
registration to the base station.
¢ ¢
v Ð
Handset
Press the display key.
§Yes§
You can cancel the restoring
process by pressing a or the
display key
a
Press and hold (idle status).
¢
Reset Handset
.
§No§