Offset stacker sensor (tamper HP left and right) removal
1. Remove the offset stacker top cover. See "Offset stacker top cover removal" on page 4-238.
2. Disconnect the harness to the offset stacker sensor (tamper HP left and right).
3. Using your fingers, pinch the tabs securing the staple finisher sensor (tamper HP left and right) and remove.
Offset stacker sensor (bin full send) removal
1. Remove the stapler/stacker controller card assembly. See "Stapler/stacker controller card assembly
removal" on page 4-246.
A
4-249
Repair information