Bin Mailbox Assembly Deflector Gate Solenoid Removal - Dell 5535dn Service Manual

A
4. Slide the top cover towards the rear and remove.

4-bin mailbox assembly deflector gate solenoid removal

1. Remove the 4-bin mailbox assembly top cover. See "4-bin mailbox assembly top cover removal" on
page 4-226.
2. Remove the screw (A) securing the deflector gate solenoid to the 4-bin mailbox assembly.
A
3. Carefully unroute the deflector gate solenoid cables from the cable clips under the top cover.
4. Disconnect the appropriate deflector gate solenoid cable from the controller card.
5. Pull the deflector gate solenoid and harness from the 4-bin mailbox assembly.
4-227
Repair information