Connection Access Cover, Rear Removal - Dell 5535dn Service Manual

5. Remove the four screws (C) securing the printhead assembly to the machine.
C
6. Remove the printhead assembly.
Replacement Warning: When replacing the printhead assembly, ensure that the printhead skew is properly
adjusted, or print quality issues will occur. See "Polygon printhead mechanical registration adjustment"
on page 4-2.

Connection access cover, rear removal

1. Gently detach the two hinges (A) of the connection access cover, rear from the machine.
A
2. Remove the connection access cover, rear.
4-35
Repair information