High Capacity Input Tray (Hcit) Cover, Right Removal - Dell 5535dn Service Manual

High capacity input tray (HCIT) cover, right removal

Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
Note: Before removing the HCIT right cover, first remove the right side anti-tip latch assembly. See "High
capacity input tray (HCIT) anti-tip latch assembly removal" on page 4-165.
1. Remove the High capacity input tray (HCIT) cover, rear. See "High capacity input tray (HCIT) cover, rear
removal" on page 4-160.
2. Remove the six screws (A) securing the HCIT cover, right to the drawer.
3. Use a screwdriver to gently pry up on the tabs (B).
4-162
Service Manual
A
A
B