Other Connectors; Indicators Description - Comtech EF Data KST-2000B Installation And Operation Manual

Ku-band satellite transceiver
Table of Contents

Advertisement

Ku-Band Satellite Transceiver
Operation
3.4.7

Other Connectors

TXA IF OUT Connector (J7)
TXB IF OUT Connector (J8)
RXA IF IN Connector (J9)
RXB IF IN Connector (J10)
RX IF OUT Connector (J11)
TX IF IN Connector (J12)
3.5

Indicators Description

TX A Online Indicator
TX B Online Indicator
RX A Online Indicator
RX B Online Indicator
The TXA IF OUT connector (J7), is a type N, female connector
used to route the transmit IF signal (70 or 140 MHz) to
KST-2000A/B Unit A, IF INPUT. From the system TX IF IN port
(J12). Nominal impedance 50Ω, unbalanced.
The TXB IF OUT connector (J8), is a type N, female connector
used to route the transmit IF signal (70 or 140 MHz) to
KST-2000A/B Unit B, IF INPUT. From the system TX IF IN port
(J12). Nominal impedance is 50Ω, unbalanced.
The RXA IF IN connector (J9) is a type N, female connector used
to route the received IF signal (70 or 140 MHz) from KST-2000A/B,
Unit A IF OUTPUT to the system RX IF OUT (J11). Nominal im-
pedance is 50Ω, unbalanced.
The RXB IF IN connector (J10) is a type N, female connector used
to route the received IF signal (70 or 140 MHz) from KST-2000A/B,
Unit B IF OUTPUT to the system RX IF OUT (J11). Nominal im-
pedance 50Ω, unbalanced.
The RX IF OUT connector (J11), is a type N female connector used
to connect the RX IF signal (70 or 140 MHz) from the online
KST-2000A/B down converter to the modem. Nominal impedance
is 50Ω, unbalanced.
The TX IF IN connector (J12), is a type N, female connector used
to route the 70 or 140 MHz IF signal from a modem, through an IF
splitter to each of the KST-2000A/B IF input of the up converters.
Nominal impedance is 50Ω, unbalanced.
The TX A online indicator is a weatherproof, green LED that illumi-
nates when uplink A is online, and extinguishes when uplink A is
offline.
The TX B online indicator is a weatherproof, green LED that illumi-
nates when uplink B is online, and extinguishes when uplink B is
offline.
RX A online indicator is a weatherproof, green LED that illuminates
when downlink A is online, and extinguishes when downlink A is
offline.
The RX B online indicator is a weatherproof, green LED that illumi-
nates when downlink B is online, and extinguishes when downlink B
is offline.
3–15
Revision 9
MN/KST2000AB.IOM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kst-2000a

Table of Contents