Figure C-2. Typical Converter Unit Installation On Spar - Comtech EF Data KST-2000B Installation And Operation Manual

Ku-Band Satellite Transceiver
Single-Thread Equipment Mounting
C.2.1.2 Converter Spar Arm Mounting Instructions
1. Position the Converter unit against the spar arm of the satellite dish and bolt the
two spar support brackets to the Converter unit brackets as shown in Figure C-2
Utilize four each 1/4x-20x1" bolts, 1/4 split, and 1/4" flat washers.

Figure C-2. Typical Converter Unit Installation on Spar

C–5
Revision 9
MN/KST2000AB.IOM