Figure 3-2. 1:1 Redundant System Block Diagram - Comtech EF Data KST-2000B Installation And Operation Manual

Ku-Band Satellite Transceiver
Operation
Note: For a redundant system, each KST-2000A/B must have a different serial address
for the M&C through the RJU-2000 to work properly. Also, due to the parallel nature of
the M&C interface only EIA-485, and EIA-422, communications are supported
through this device.

Figure 3-2. 1:1 Redundant System Block Diagram

PL/8085-2
3–7
Revision 9
MN/KST2000AB.IOM