Appendix D. Redundant Equipment Mounting; Tools Required - Comtech EF Data KST-2000B Installation And Operation Manual

Appendix D. REDUNDANT
EQUIPMENT MOUNTING
This section describes the optional installation hardware and procedures for the following
applications:
Section Installation Description
D.1

Tools required

D.2 1:1 Converter installation
D.2.1 Spar arm mount
D.2.2 Pole mount (round or square)
Note: The converter units can be installed anywhere on or near the
antenna.
D.3 1:1 SSPA installation
D.3.1 For offset feed mount antenna
D.4 1:1 LNA installation
D.4.1 For offset feed mount antenna
D.5 Cable installation
Installation procedures and hardware kits have been verified on the following antennas:
•
PRODELIN 1.8, 2.4, and 3.8M
•
Channel Master offset antenna
D–1