This chapter provides system equipment and external connections information for both
single thread and redundant systems. Refer to Appendix C (single-thread equipment) and
Appendix D (redundant equipment) for installation procedures specific to particular
mounting applications.
2.1.
Single-Thread System Components
The standard components delivered with a single-thread system include:
QTY
1
1
1
As Required
As Required
As Required
Note: Antenna type shall be indicated when ordering the KST-2000A/B unit.
Chapter 2. INSTALLATION
Base converter unit
HPA (no HPA necessary for the +15dBm requirement)
LNA (KST-2000A system) or LNB (KST-2000B system)
12ft (3.66m) Prime power cables for all converter units and applicable
amplifiers
5ft (1.52m) Interlink cabling
Mounting hardware for a spar mounted offset antenna.
Note)
Description
2–1
(see