Table of Contents
Advertisement
Ku-Band Satellite Transceiver
FSK Remote Control Commands
Parameter
Command
Type
(Instruction
Code and
qualifier)
Clear Latched Up
ULR=
Converter Faults
Clear Latched
DLR=
Down Converter
Faults
Set Receive Band
SRB=
Arguments for
Description of arguments
Command or
(note that all arguments are ASCII numeric codes, that is, ASCII
Response to
codes between 48 and 57)
Query
None
Command only.
<add/ULR='cr'
>add/ULR='cr''lf'
None
Command only.
<add/DLR='cr'
>add/DLR='cr''lf'
1 byte
Command/Query.
<add/SRB=n'cr'
>add/SRB='cr''lf'
<add/SRB?'cr'
>add/SRB=n'cr''lf'
Where n = A, B, or C the receive band.
Response to Command (target to
controller)
ULR= (message ok)
ULR? (received ok, but invalid arguments
found)
ULR* (message ok, but not permitted in
current mode)
DLR= (message ok)
DLR? (received ok, but invalid arguments
found)
DLR* (message ok, but not permitted in
current mode)
SRB= (message ok)
SRB? (received ok, but invalid arguments
found)
SRB* (message ok, but not permitted in
current mode)
E-24
Revision 9
MN/KST2000AB.IOM
Query
(Instruction
Code and
qualifier)
n.a.
n.a.
SRB?
Advertisement
Table of Contents
