Ku-Band Satellite Transceiver
Terminal Mode Commands
B.2.3
End Character
Each message is ended with a single character which signals the end of the message:
•
•
B.3
System Configuration Commands
Commands and responses for setting the basic system parameters of uplink and downlink
frequency and attenuation, for making an adjustment on the internal reference, and for
disabling the RF output are as specified in the following paragraphs. Commands are
included for setting and selecting programmed frequency and attenuation values, for
locking out changes in settings, and for reading the status of settings.
"cr"
Carriage return character for commands
"]"
End bracket for responses
B–4
Revision 9
MN/KST2000AB.IOM