Error Messages - Brother DCP-9055CDN Service Manual

3.2

Error Messages

The error messages displayed on the LCD of the machine and their description are shown in
the table below.
Error message
Access Error
Calibrate
Cartridge Error
Condensation
Connection Error
Connection Fail
Cooling Down
Cover is Open
DIMM Error
Disconnected
Document Jam
Drum Error
Description
The USB device is taken out while data is
being processed.
Incorrect density sensor measurement
value when implementing adjustment of
color density.
Density patch measurement is not
completed normally when implementing
adjustment of color density.
Toner of the color which is being used
reaches the end of life when implementing
adjustment of color density.
Failure to detect a new black toner
cartridge.
Failure to detect a new yellow toner
cartridge.
Failure to detect a new magenta toner
cartridge.
Failure to detect a new cyan toner
cartridge.
Condensation occurred on the laser unit.
As the result that an access point is
searched, more than one access point is
found.
As the result that an access point is
searched, the access point is found, but
connection fails to be established.
Cooling down the inside of the machine to
protect it.
The front cover is open.
The fuser cover is open.
Defective DIMM is installed.
The other person or other person's fax
machine disconnected the line.
The document was not inserted, or fed
properly.
Dirt on drum unit.
2-25
Error Refer
codes to:
---
81 2-65
82 2-65
87 2-67
C0 2-85
C1 2-85
C2 2-85
C3 2-85
1A 2-37
---
---
75 2-60
A1 2-76
56 2-52
C9 2-88
---
A2, 2-77
A3
7D 2-61
Confidential