9.70 Registration Mark Sensor Holder ASSY/
Shutter Solenoid
(1) Disconnect the Connector (CN8) from the High-voltage power supply PCB ASSY.
CN8
Connector
High-voltage power supply PCB ASSY
(2) Remove the two Taptite bind B M3x10 screws to remove the Registration mark sensor
holder ASSY from the Base frame unit.
Fig. 3-220
Base frame unit
Fig. 3-221
3-156
Shutter solenoid
Registration mark sensor holder ASSY
Taptite bind B M3x10
<Back side>
Confidential