Error Messages - Brother MFC-J2320 Service Manual

3.2

Error Messages

Error Message
B&W 1-sided Print
Only
Replace Ink
Cannot Detect
Cannot detect ink
volume
Cannot Print
Replace Ink
Comm. error
Cover is Open.
Document Jam
High Temperature
Ink Absorber Full
Ink Absorber Near
Full
Ink low
Install Starter Ink
Low Temperature
Media Error
No Ink Cartridge
State
After judging getting close to ink replacing
timing by the ink remaining sensor, ink
discharged for specified times.
Printing is possible for black only
documents.
Cannot identify a ink cartridge.
Ink remaining counter in the ink cartridge IC
chip becomes 0.
Ink ejection has reached the specified
number of times when the ink remaining
sensor detects that the ink replacement
period is approaching.
Communications error occurs.
Detect document scanner open state.
Detect ink cartridge cover open state.
Document scanning position sensor detects
paper jam inside ADF.
Machine interior thermistor detects that
room temperature is too high.
Purge count or flushing count reach upper
threshold.
Purge count or flushing count are near
upper threshold.
Ink remaining sensor detects near ink
replacing timing.
The ink cartridge which does not contain
required ink volume for the initial installation
has been set at the initial installation.
Machine interior thermistor detects that
room temperature is too low.
Detect defective in memory card.
Ink cartridge detection sensor detects no
cartridge.
2-14
Error
Reference
Code
26,27,28,29
20,21,22,
23,24,25
26,27,28,29
26,27,28,29
4.9.3
A1
2F
A2,A3
40
46
4.10.7
4.10.6
24
4.10.6
40
4.10.2,
4.10.3
2A,2B,2C,
2D
Confidential