9.38 NCU PCB ASSY
(1) Remove the Screw pan (S/P washer) M3.5x6 screw to remove the NCU FG harness
ASSY from the Main body.
(2) Disconnect the Connector (CN9) from the Main PCB ASSY.
(3) Disconnect the wiring from the Main PCB ASSY.
NCU FG harness ASSY
Screw pan (S/P washer) M3.5x6
(4) Remove the two Taptite bind B M4x12 screws to remove the NCU unit from the Main
body.
Main body
Main body
Connector
Main PCB ASSY
Taptite bind B M4x12
Fig. 3-134
Fig. 3-135
3-103
CN9
NCU unit
Confidential