Head Protection Airbag (Hps) Components - BMW 1999-2005 M3 Service Manual

Airbag System (SRS)
6 of 8
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/7...
Detach harness connector.
CAUTION!
When removing and installing the
airbag unit, pay attention to the
routing of the electrical harness to
avoid kinks or breaks in the wire.
Rear door airbag:
-
Detach electrical harness
connector.
Remove mounting bolts and
remove airbag from door.
Installation is reverse of removal.
-
Route electrical harnesses as they
were before.
Use new wire ties as necessary.
Use new self-locking mounting
bolts.
Tightening torque
Side-impact airbag
to door
Head protection airbag (HPS)
components
Replacement of a head protection
airbag (HPS) is an extensive operation.
Replacement includes removal of the
following components:
8.5 Nm (75
in-lb)
2/25/2009 11:21 PM