Blower Motor Resistor Pack, Replacing - BMW 1999-2005 M3 Service Manual

Heating and Air Conditioning
3 of 4
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/6...
Pry off blower motor retaining strap.
Pull blower motor forward to
-
remove.
Installation is reverse of removal:
-
Align slot in blower motor with
mounting tab in blower motor
housing.
Blower motor resistor pack,
replacing
Note:
The blower motor resistor pack is also
referred to as the final stage unit.
- Remove right footwell air duct as
described earlier.
Working under right side of dashboard
at side of IHKA housing, unhook
linkage, then remove air distribution
motor (arrow).
To remove blower resistor pack from
IHKA housing:
Remove mounting screws
2/25/2009 11:17 PM