BMW 1999-2005 M3 Service Manual page 1206

Seat Belts
3 of 5
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/7...
Remove shoulder belt reel
mounting bolt inside backrest.
Note:
Remove bowden cable from backrest
brackets and unhook from backrest
release latch. Center seat belt reel can
be then be removed.
- Outboard shoulder belt:
Remove roof-pillar (C-pillar) trim.
Remove center shoulder belt.
- Lift up rear seat cushion(s) to
access rear seat belt lock mounting
bolt(s).
The accompanying illustration provides
information on rear seat belt component
locations and fastener torques.
1 - Bolt M10 -tighten to 31 Nm (23 ft-lb)
2 - Right shoulder belt reel assembly.
3 - Center belt lock
4 - Right belt lock
5 - Left belt lock
6 - Center shoulder belt reel assembly
7 - Left shoulder belt reel assembly
8 - Bolt M12 -tighten to 31 Nm (23 ft-lb)
When installing seat belt lock
-
straps:
Install right belt lock strap (which is
shorter) underneath center belt lock
2/25/2009 11:20 PM