Blower Components; Blower Motor, Removing And Installing - BMW 1999-2005 M3 Service Manual

Heating and Air Conditioning
1 of 4
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/6...

Blower Components

Blower motor, removing and
installing
Remove housing for interior ventilation
microfilter.
Remove upper cover and
microfilter.
Open wiring harness loom (A) and
remove wires.
Unfasten screws (B) and remove
lower housing.
Remove heater bulkhead cover:
Remove engine compartment side
trim panel. Turn locking clips (A)
and slide trim panel up.
Remove heater bulkhead cover
mounting screws (B) and lift cover
off bulkhead.
Remove intake manifold cover:
Remove plastic trim covers
(arrows).
Remove cover hold down bolts
and lift off cover.
640-4
2/25/2009 11:17 PM