Seat Belts
2 of 10
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/7...
Do not expose pyrotechnic
components to temperatures
above 75°C (167°F).
Pyrotechnic components can
only be tested electrically when
installed, using BMW service
tester DIS, MoDiC or equivalent
scan tool.
Do not fire a pyrotechnic gas
generator prior to disposal. It
must be fired by a special
disposal company or shipped
back to BMW in the packaging
of the new components.
During body straightening and
welding with an electric arc
welder, always disconnect the
battery and the connection to
the pyrotechnic gas generators.
-
Detach battery negative (-) cable
in luggage compartment.
CAUTION!
Prior to disconnecting the battery,
read the battery disconnection
cautions given at the front of this
manual on page viii.
Remove front seat as described in
-
520
Seats.
Remove pyrotechnic belt tensioner:
Detach tensioner harness
connector from seat rail by cutting
wire tie (A).
2/25/2009 11:20 PM