Instruments
9 of 9
Copyright © 2006 Robert Bentley, Inc. All rights reserved.
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/6...
Place a towel over steering column.
Carefully tilt top of cluster out of dash
panel. Unlock and disconnect harness
connectors (arrows) from back of
cluster.
Note:
Steering wheel does not need to be
removed to remove instrument cluster.
If it is necessary to replace cluster,
detach trim by unlocking plastic clips
(arrows) and pushing through slots.
Installation is reverse of removal,
-
noting the following:
Instrument cluster harness
connector locking levers must be in
up position before installing
connector.
Recode new or replacement cluster
using BMW scan tools DISplus,
MoDiC or equivalent.
2/25/2009 11:14 PM