License Plate Light, Removing And Installing - BMW 1999-2005 M3 Service Manual

Lights
6 of 6
Copyright © 2006 Robert Bentley, Inc. All rights reserved.
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/6...
hose are not damaged or kinked.
Note:
Replace sealing plastic and grommets
as necessary during reassembly.
TIghtening torque
Rear spoiler to
rear glass
License plate light, removing
and installing
Using a flat tipped screw driver, pry
gently on right side of license plate
light assembly (arrow). Lift off lens.
CAUTION!
To avoid marring trim, wrap the
screwdriver tip with tape.
- Remove bulb.
Note:
Inspect bulb contact springs for damage
and corrosion. Replace socket
assembly if necessary.
License plate light application
License plate bulb
Installation is reverse of removal.
-
6 Nm (4 ft-lb)
12V 5W
2/25/2009 11:15 PM