Stop Scanning - Oce VarioPrint 2090 Function Manual

Stop scanning

Introduction
When you make a copy, the Océ VarioPrint 2090 starts by scanning the
documents that are in the automatic document feeder or on the glass plate. You
can stop the scanning with the correction key
press the correction key, the scanning will stop after the scanner has processed
the originals that are already separated from each other in the automatic
document feeder.
The screen displays the message 'Cancel this job?' with two options.
'Yes'
■
'No'
■
Illustration
[50] Stop scanning
[50] Stop scanning
How to stop scanning
Press the correction key
1
originals.
Result
The scanning of the originals stops.
■
The message 'Cancel this job?' appears. Select 'Yes' to cancel or 'No' to
■
resume the job.
If you select 'Yes', the job is removed from the job queue.
■
If you use the set-build key
Note:
subset, not the job in the job queue.
If you cancel the scanning, this also indicates that you cancel the
Note:
corresponding copy job.
92 Océ VarioPrint 2090 Job manual
on the operator panel while the scanner scans the
, the cancel option only cancels the last
on the operator panel. If you