Handle Contradictions - Oce VarioPrint 2090 Function Manual

Handle contradictions

Introduction
Three types of contradictions can occur on the Océ VarioPrint 2090 .
Specification contradictions
■
Specification contradictions refer to combinations of settings that are not
possible.
For example, you want to make a 2-sided scan from the glass plate (not
possible, change the original setting from 2-sided to 1-sided).
Start contradictions
■
Start contradictions refer to conflicts that occur when the required
resources for a job are not available. Start contradictions occur after a job
is sent to the queue.
For example, a job needs staples, but the staplers are empty. An alarm bell
is displayed. This alarm bell indicates that a certain resource is not available
(no staples, no toner etc).
Run-time contradictions
■
Run-time contradictions occur when the system runs out of required
resources (no staples, toner etc) while the job is active. The active or current
job stops. The screen will show a message.
98 Océ VarioPrint 2090 Job manual