Stapled Copies - Oce VarioPrint 2090 Function Manual

Stapled copies

Introduction
The finisher of the Océ VarioPrint 2090 has two staplers to staple sets. The
finisher can also have an optional off-line stapler.
You can staple as follows.
1 staple in portrait direction
■
2 staples
■
1 staple in landscape direction.
■
Select the correct document type to create a document with a landscape
staple.
[43] Staple function
[43] Staple function
If your set is too thick to staple (this is measured), the screen displays a
dialogue. You can do the following.
Continue without staples.
■
Cancel the job.
■
If one of the staplers is or runs empty, the screen displays a dialogue. You can
do the following.
Continue without staples.
■
Refill the staplers.
■
Cancel the job.
■
Copy jobs 81