Clear The Staple Jams - Oce VarioPrint 2090 Function Manual

Clear the staple jams

Introduction
Task for: key operator
The stapler has a maximum capacity of 80 sheets of paper or sets not thicker
than 7 mm. When a staple error occurs, a message appears on the screen of the
operator panel. Follow the instructions on the screen to correct the problem.
The off-line stapler can staple sets with a maximum stack size of 7 mm
Note:
(80 g/m
When there is a problem in the stapler, replace the stapler cartridge. Use the
method described in the procedure Add the staples to correct a staple jam.
Remove any loose staples. Make sure that the staples do not fall into the Océ
VarioPrint 2090 . Keep the stapler cartridge which caused the problems. Give
the stapler cartridge to the Océ service technician.
After you correct the problem, the event can occur that the stapler does
Note:
not staple the next two or three sets.
106 Océ VarioPrint 2090 Job manual
)
.