Extended Copies; Combine Subsets Into One Document - Oce VarioPrint 2090 Function Manual

Extended copies

Combine subsets into one document

Introduction
The Océ VarioPrint 2090 allows you to create your documents and make a
report, a manual or a brochure. Combined (built) documents can include
different parts like a title page, the table of contents, the various chapters and
the appendices. You can scan some parts of the document 1-sided and other
parts 2-sided. You can print the different parts of a document on cover material
and separation sheets. You can insert for example pre-printed paper and blank
pages.
Subsets
A subset of a document is a number of pages to process in a defined method,
for example print on red paper. When the required processing method changes,
a new subset begins. When you process parts of a document in a different
method, you must divide the document into subsets.
The set-build key
Use the set-build key
on the lower left-hand side of the operator panel left of the start key
When you use the set-build key, the following settings apply to the whole
document.
The staple settings.
■
The number of copies.
■
Remember that you can only combine hardcopy originals into a set-build job.
You can not use the set-build key for (digital) documents in the mailbox. You
can only use originals from the glass plate or the automatic document feeder.
Use the 'Copy' function on the operator panel to start a set-build job.
84 Océ VarioPrint 2090 Job manual
to scan different subsets. The set-build key is located
.