Secure Print Jobs - Oce VarioPrint 2090 Function Manual

Secure print jobs

Introduction
The Océ VarioPrint 2090 allows you to protect sensitive information in a print
job. If you want to print a job that contains sensitive information, you can set
a protective PIN code. This PIN code is set in the printer driver or in Océ Intra
Logic. The PIN code has a length of 1-5 digits. After you send the print job to
the Océ VarioPrint 2090 , you can not change the PIN code of the print job. The
secure print job goes to the mailbox on the Océ VarioPrint 2090 . You can open
the job editor to modify the job settings. You do not need to enter the PIN code
to change the job settings. When you press the start key
Enter the PIN code to continue.
You do not need a PIN code to remove a secure print job from the
Note:
mailbox. (see 'Remove jobs from the mailbox' on page 45)
When to do
When you start a secure print job on the Océ VarioPrint 2090 , a message
appears that asks you to enter the PIN code.
Before you begin
Create a print job on your PC. Set the PIN code in the printer driver or in Océ
Intra Logic before you send the job to the mailbox of the Océ VarioPrint 2090
(see 'Create a secure print job with the printer driver' on page 60).
You can not set or change a PIN code of a print job through the operator
Note:
panel of the Océ VarioPrint 2090 .
How to print a secure print job
Open and print the job in the mailbox (see 'Print a job from the mailbox' on
1
page 37).
Press the start key
2
A message appears that asks you to enter the PIN code.
Use the numeric keys to enter the PIN code (enter 1-5 digits).
3
Print jobs (mailbox)
.
, a message appears.
51