Basic Copies; Make A Copy - Oce VarioPrint 2090 Function Manual

Basic copies

Make a copy

Introduction
The Océ VarioPrint 2090 is a network printer/copier. The print jobs are digital
originals that you send from the desktop to the mailbox. The copy jobs are
analogue originals that you scan and print on the Océ VarioPrint 2090 .
The workflow to make a copy is presented in the table below.
Actio
ns
1
2
3
4
5
If you press the start key
the operator panel, a message appears on the display. The message indicates
that you must first select the function 'Copy' on the operator panel to start a
copy job (or the function ' Print from mailbox...' to start a print job).
Before you begin
When you start a copy job.
Remove all staples from your originals with the staple remover.
■
Remove the paper clips.
■
Make sure that the originals in the automatic document feeder have the
■
same size.
Make sure that the originals are not curled.
■
70 Océ VarioPrint 2090 Job manual
Description
Put originals in the automatic document feeder or on the glass plate
Access the 'Copy' function to create a copy job
Describe the original and print settings
Set the number of copies
Start the copy job with the start key
and you have not selected the 'Copy' function on