Restart The Océ Smart Imager - Oce VarioPrint 2090 Function Manual

Restart the Océ Smart Imager
Introduction
When you change some settings in the Océ VarioPrint 2090 Settings Editor,
the software may ask you to restart the Océ Smart Imager. A restart activates
the new changed settings.
If you restart the Océ Smart Imager the following is achieved.
the Océ VarioPrint 2090 Settings Editor changes become active.
■
the jobs in the mailbox are saved.
■
the job queue is not saved.
■
the job number of new copy and scan jobs is set to 1.
■
You can restart the Océ Smart Imager if you use the Océ VarioPrint 2090
Settings Editor. Follow the procedure below to restart the Océ Smart Imager.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in key
operator mode or system administrator mode. To start Océ VarioPrint 2090
Settings Editor, see Access the Océ VarioPrint 2090 Settings Editor in the
Configuration and maintenance manual.
Get started 31