Figure 2-11. Removing The Lcd Module - HP OmniBook 3000 Service Manual

LCD/LVDS Cable
F1391-60961
Reassembly Notes
• Secure the LCD/LVDS cable to the LCD module with a piece of Kapton tape next to the LCD
connector.
• Before installing the LCD module, make sure the EPE foam is properly positioned inside the LCD
bracket. The two flaps should be on top of the center bar of the bracket.
• Position the cables properly in the hinges before installing the bezel.
• Make sure the bezel snaps to the case along all edges. Pull to the side to help seat the snaps.
• Make sure the screw covers stick securely in place.
HP OmniBook 3000

Figure 2-11. Removing the LCD Module

Screw, M3.0×5mm
F1391-60950 (4)
LCD Module
F1391-60907
EPE Foam
F1391-60926
Removal and Replacement 2-13