Turning The Omnibook On And Off; Table 1-2. Activating Power Modes; Table 1-3. Power Mode Descriptions - HP OmniBook 3000 Service Manual

Turning the OmniBook On and Off

• On. Press the blue power button to turn the computer on.
• Standby. Occurs automatically if the computer is inactive for about 2 minutes.
• Suspend. Press the blue power button briefly (about 1 second) to suspend activity when the
OmniBook is on. The computer resumes your previous work session when you turn it back on.
Closing the lid (for more than 2 seconds) also suspends the computer. (If an external monitor is
connected, closing the lid merely turns off the built-in display and turns on the external display.)
• Hibernate. Press Fn+F12. The computer completely shuts down, but your current work session is
first saved to disk. The computer will reboot and restore your previous session when you turn it
back on.
• Off. Press the blue power button for more than 4 seconds to completely shut down the computer.
Unsaved data is lost. The computer will reboot when you turn it back on.
Power Mode
Standby
(display off)
Suspend
(low power, "instant-on")
Hibernate
(off, session saved)
Off
(off, nothing saved)
Power Mode Condition
Reduced-power/stopped state. Everything is in a reduced-power state. Network devices are
Standby
maintained. Your current work session continues at turn-on (any key-press).
Low-power/stopped state. Lower power state than Standby. Everything is off or in a low-
Suspend
power state. Network devices are off. Your previous work session resumes at turn-on. For
plug-and-play operating systems, network connections resume at turn-on.
Hibernate No-power/stopped state. Session is saved on the hard disk. Everything is shut down.
Computer reboots at turn-on and restores previous session and network connections (if
plug-and-play).
No-power/stopped state. Everything is shut down (battery continues charging if ac adapter
Off
is connected). Computer reboots at turn-on and restores network connections (if plug-and-
play).
HP OmniBook 3000

Table 1-2. Activating Power Modes

To Enter Mode
Allow time-out
or
press Fn+S.
Press blue power button for about
1 second
or
close the lid (without external monitor)
or
click Start, Suspend
or
allow time-out.
Press Fn+F12
or
allow time-out.
Press blue power button longer than
4 seconds
or
click Start, Shut Down.

Table 1-3. Power Mode Descriptions

To Turn Back On
Press any key or the pointing device
to display your current session.
Press blue power button for "instant-
on" to your current session.
Press blue power button to turn on,
reboot, and restore session.
Press blue power button to turn on
and reboot.
Product Information 1-3