Removal Procedure
1. Unplug the ac adapter, if present, and remove the battery.
2. On the bottom of the unit, insert a flat-blade screwdriver into the slot at the edge of the BIOS cover
and pry it off.
3. Use an IC insertion/removal tool to remove the system BIOS IC or keyboard BIOS IC from its
socket.
System BIOS IC
F1391-60919
(near case foot)
Reassembly Notes
• Align the IC with the slot in the socket. The IC is keyed to fit correctly.
• Press down firmly on the IC with your thumb to ensure a proper connection.
• Reprogram the ICs by programming the BIOS—see the note above.
2-26
Removal and Replacement
BIOS Insertion/Removal Tool
F1371-60904
Keyboard BIOS IC
F1391-60918
(near module latch)
Figure 2-22. Removing a BIOS IC
BIOS Cover
F1391-60929
HP OmniBook 3000