893-743-A
IP Parameters Menu
When you select the i command [Set IP parameters] from the Protocol
Parameters menu, the menu in Figure 4-17 is displayed.
IP Parameters Menu
Current working parameters:
IP Address:
Subnet Mask:
Router IP Address:
Secondary Router IP Address:
-a
Set my IP address
-m
Set subnet mask
-r
Set default router's IP address
-d
Set secondary default router's IP address
-ESC
Return to Protocol Parameter Menu
Enter command:
Figure 4-17. IP Parameters menu
When you modify run-time parameters on this menu, the screen changes to
show both the original settings and the new ones (see Figure 4-18). The new
settings will take effect only after you exit the configuration program and save
them to NVRAM (using the w command on the main menu), then restart or
reset the Model 281xSA hub.
Setting Run-time Parameters
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
[none]
4768
4-31