Connecting The Aui Port To A Fiber Backbone; Figure 3-12. Interconnecting Model 2813Sa Hubs Using An Ieee 802.3 - Bay Networks 281xSA Using Manual

893-743-A

Connecting the AUI Port to a Fiber Backbone

Connecting an IEEE 802.3 10BASE-FL transceiver to the AUI port on the
Model 2813SA hub allows you to connect the Model 2813SA hub to a fiber
backbone. Figure 3-12 shows a typical network with two Model 2813SA hubs
connected to a fiber backbone. An AUI patch cable connects each Model
2813SA hub to a SynOptics Model 504A transceiver that has the SQE test
disabled. A fiber optic cable is connected between the two transceivers.
AUI cable
Fiber
optic
cable
AUI cable

Figure 3-12. Interconnecting Model 2813SA hubs using an IEEE 802.3

10BASE-FL transceiver
Multiple-hub Networks—System 2000 Only
Model 2813SA Ethernet Hub
IEEE 802.3 10BASE-FL transceiver
(for example, Model 504B Transceiver)
Model 2813SA Ethernet Hub
LattisHub 2813SA
UTP cables
to Ethernet
stations
LattisHub 2813SA
4656
3-15