Figure 4-8. Run-Time Parameters Menus - Bay Networks 281xSA Using Manual

Ctrl - Y
Set protocol parameters
Set SNMP parameters
Set out-of-band parameters
Set profile parameters
Set boot parameters
Set security parameters
Write values to EEPROM
Exit
Restart 281xSA
Reset 281xSA
(takes 45 seconds)
893-743-A
Set IP parameters
Set IPX parameters
Toggle management protocol
Return to main menu
Set read community
Set read/write community
Toggle authentication traps
Set IP trap receivers
Set IPX trap receivers
Return to main menu
Set baud rate
Set initialization string
Return to main menu
Set location
Set name
Set contact
Return to main menu
Toggle boot mode
Toggle boot protocol
Toggle image load mode
Toggle config load mode
Return to main menu
Set security level
Toggle security configuration lock
Return to main menu

Figure 4-8. Run-time parameters menus

Menus for configuring the Model 281xSA hub have similar formats. Each
menu shows the current settings for a group of parameters, followed by a list
of commands for changing the parameters (see Figure 4-9 for an example).
Using Configuration Menus
Set my IP address
Set subnet mask
Set default router's IP address
Set secondary default router's IP address
Set boot router's IP address
Set boot server's IP address
Set boot file name
Return to Protocol Parameter menu
Set network number
Return to Protocol Parameter menu
4760
4-13