Chapter 3 Network Configurations And Cable Connections - Bay Networks 281xSA Using Manual

Chapter 3
893-743-A
Network Configurations and Cable
Connections
This chapter provides general requirements and recommendations for proper
network configurations using the Model 281xSA Ethernet Hub. The chapter
summarizes the possible expansion of a network from a single-hub network to
one that encompasses several clusters and includes System 3000 equipment.
Single-hub, cluster, and multiple-hub networks are described, as well as
configuration rules for each type. Each network configuration description is
followed by instructions for making the cable connections necessary for that
configuration.
The installation procedures in this chapter assume that UTP horizontal
distribution cables are already installed, providing connection from the work
area wall outlet to the wiring closet punchdown blocks, and that cables are
properly identified. Normal cabling system practices are assumed; your
installation procedure may vary slightly, depending on your particular cabling
system.
This chapter includes the following topics:
A summary of how networks can expand from one hub to many
A description of a typical single-hub network, with instructions for
making the necessary cable connections
A description of the System 2000 cluster configuration and instructions
for connecting hubs into a cluster
Instructions for connecting multiple System 2000 hubs and clusters to
form a larger network
Examples of typical networks that use System 2000 and System 3000
equipment
3-1