Table of Contents
Advertisement
Network Configurations and Cable Connections
3-6
b. If you are using a Model 928 integrated transceiver, attach the captive
cable on the Model 928 transceiver to the wall outlet (see Figure 3-5).
Figure 3-5. Connecting the Model 928 transceiver to the wall
Repeat steps 1 and 2 for each type of station until all Ethernet stations are
connected to the UTP horizontal distribution cabling through the RJ-45
connectors of wall outlets.
Using a 10BASE-T Interface Card
If a 10BASE-T network interface card is installed in the Ethernet station, you
do not need the external 10BASE-T transceiver and AUI cable. To connect an
Ethernet station with a 10BASE-T network interface card, follow these steps:
1.
Connect one end of a UTP patch cable (for example, a Model 910
cable) to the RJ-45 port of the 10BASE-T interface card
(see Figure 3-6).
Wall connector
RJ-45 plug
4753
893-743-A
Advertisement
Table of Contents
