Static Or Dynamic Ip - Draytek Vigor 2110 User Manual

WAN physical type
After finishing all the settings here, please click OK to activate them.
4 . 1 . 3 S t a t i c o r D y
4 . 1 . 3 S t a t i c o r D y
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static or Dynamic IP as the accessing protocol of the internet, please choose Static or
Dynamic IP mode from Internet Access menu. The following web page will be shown.
setting is available for WAN1 only.
Fixed IP – Click Yes to use this function and type in a
fixed IP address in the box of Fixed IP Address.
Default MAC Address – You can use Default MAC
Address or specify another MAC address by typing on the
boxes of MAC Address for the router.
Specify a MAC Address – Type the MAC address for the
router manually.
Choose Auto negotiation as the physical type for your
router.
n a m i c I P
n a m i c I P
86
Vigor2110 Series User's Guide