User Password - Draytek Vigor 2110 User Manual

4 . 1 4 . 4 U s e r P a s s
4 . 1 4 . 4 U s e r P a s s
Sometimes, you may want to access into User Mode to configure the web settings for some
reason. Vigor router allows you to set new user password to login into the WUI to fit your
request. Simply open System Maintenance>>User Password.
Available parameters are explained as follows:
Item
Enable User Mode for
simple web
configuration
Password
Confirm Password
When you click OK, the login window will appear. Please use the new password to access
into the web configurator again.
Below shows an example for accessing into User Operation with User Password.
1. Open System Maintenance>>User Password.
2. Check the box of Enable User Mode for simple web configuration to enable user mode
operation. Type a new password in the field of New Password and click OK.
w o r d
w o r d
Description
Check this box to enable user mode operation. If you do not
check this box, you cannot access into the user mode operation
even if you enter user password in login page.
Type in new password in this field.
Type in the new password again.
270
Vigor2110 Series User's Guide